Specifications

HOW TO USE
2 Touch Drop (Stop).
3 Dial the authorization code (five or six digits),
Switchhook Flash
Program a switchhook flash at the beginning of a dialing sequence. For
example, you may need to program a button with a PBX, Centrex, or Custom
Calling feature code that calls for a switchhook flash.
1 Touch Recall.
2 Touch Hold (Pause).
3 Dial the PBX or Centrex dial code sequence that gives you access to the
feature you want to program.
Touch-Tone Enable
Program Touch-Tone Enable into a dialing sequence on a line with rotary
signal. For example, you may need to use a credit card authorization service.
1 Touch Transfer.
2 Dial the credit card authorization code.
If your MERLIN Plus system works behind a PBX or a Centrex system, or you
are using the Custom Calling features, follow these directions:
1 When PBX, Centrex, or Custom Calling feature instructions tell you to dial
a ’ # , ’ dial a second ’ # . ’ For example, if the instructions tell you to dial
#4567, you must actually dial # #4567 in order to use the feature with the
MERLIN Plus system.
If your PBX, Centrex, or Custom Calling feature instructions tell you to use a
stop, touch Drop instead and for a switchhook flash, touch Recall instead.
MERLIN Plus System Features 5-105