Specifications

ADMINISTRATION None
PROGRAMMING
None
HOW TO USE
From a BE-34 Console If you are using a BIS-34 console, use the following
procedure to turn on the message light at a voice terminal:
1 At the administrator/attendant voice terminal, touch Send Message.
2 Touch the Auto Intercom button for the person’s voice terminal.
The red light next to the Auto Intercom button goes on, indicating the person’s Message
light is on.
NOTE: To turn off the light, repeat the steps.
From a B/S-22 Console If you are using a BIS-22 console, use one of the
following procedures to turn on the message light at a voice terminal:
1 At the administrator/attendant console, touch Send Message.
2 Follow one of these procedures:
b Touch an Auto Intercom button that the attendant has programmed
for the person.
b Dial a 3-character code corresponding to the Send Message button
code on the following chart.
NOTE: To turn off the light, repeat the steps used to turn it on.
from B BE-70 Console If you are using a BIS-10 console, use the following
procedure to turn on the message light at a voice terminal:
1 At the administrator/attendant console, touch Send Message.
MERLIN Plus System Features 5-101