Specifications

2 Touch Speakerphone or hang up your handset.
The MERLIN Plus system saves this number until you repeat this procedure
to save another number.
To redial this number later:
J Without touching Speakerphone or lifting your handset, repeat the first
step you used to save the number. So if you touched Saved Number,
touch it again or if you dialed #23, dial it again.
Your voice terminal speaker goes on, and you hear dialing.
2 When you hear the other person answer, touch Speakerphone or lift your
handset and begin talking.
If the line is busy, or if no one answers:
1 Touch Speakerphone, or hang up to cancel the call.
DESCRIPTION
The system attendant can turn on the Message light at the voice terminals of
people in the MERLIN Plus system in order to alert them that they have a
message. (See “Message. “)
CONSIDERATIONS
The Message light at voice terminals in the system can only be turned on at
the attendant/administrator voice terminal. The alternate attendant position
cannot turn on the message light.
If your administrator/attendant console is a BIS-22 with more than ten voice
terminals on the system, the attendant can still use the Send Message feature
by following the directions below. However, he or she will not know if the
light is already on at the voice terminal.
If you’ve programmed Personal Speed Dial numbers, such as LND or SND,
onto Auto Intercom buttons, then you cannot use those buttons with the Send
Message feature.
5-Button voice terminals do not have a Message button.
5-100 MERLIN Plus System Features