Specifications

Number of Rings
To change the number of rings (the default is two rings) before the RLA call is
answered:
1 Slide the TIP switch to P and touch Administer.
2 Dial *763 plus the number of rings (between 0 and 9) before the RLA
feature picks up the call.
NOTE: If the number of rings is set to 0, the voice terminal will not ring,
and the calls will be immediately answered.
3 Touch Administer.
The console beeps twice.
4 Leave administration mode by sliding the TIP switch to the center
position.
PROGRAMMING
A button with a green light next to it is recommended for the RLA feature.
To program an RLA button on a voice terminal:
1 Label the button RLA.
2 Slide the TIP switch to P.
The voice terminal rings every 5 seconds to remind you that you‘re programming and can’t
receive or place calls.
3 Touch the button you want to program.
4 Dial *84.
5 Slide the TIP switch to the center position.
HOW TO USE
Using the RLA Button
I[
T 9P
id
Touching the RLA button toggles the system back and forth between the
normal mode and the RLA mode. You can tell which mode you are in by the
status of the green light next to the RLA button.
Green light on = RLA mode
Green light off = Normal mode
Green light flashing = Problem with RLA
If the green light next to the RLA button is flashing, notify the system
administrator who should refer to Section 7, “Troubleshooting, ’ to correct the
problem.
5-94 MERLIN Plus System Features