Specifications

2 Dial *54 for the incoming line group.
The green lights go on next to the buttons for the lines currently assigned
to the list.
Green light on = line is assigned to the group
Green light off = line is not assigned to the group
3 Touch line buttons until the green lights show the makeup you want for
the line group.
4 Touch Administer.
The console beeps twice.
6 Leave administration mode by sliding the TIP switch to the center
position.
888
n n n
0
n n n
mmm
354
Passwords
You andothers in your business must enter a password to use RLA. The
password is 5-digits and must be entered in order to gain access to an outside
line using RLA OY to change the current call forward number from a remote
location. The first two numbers in the password are the caller’s intercom
number.
To create or invalidate a password, follow this procedure:
1 Enter administration mode by sliding the TIP switch to P and touching
Administer.
2 Dial *56.
3 To create a password for a particular intercom number, dial a MERLIN
Plus system intercom nutiber plus any three digits (except 000).
The console beeps twice.
4 To invalidate any password beginning with a particular intercom number,
dial the intercom number plus 000. Repeat the procedure for more
passwords.
The console beeps twice.
5 Touch Administer.
The console beeps twice.
6 Leave administration mode by sliding the TIP switch to the center
position.
T l P
q
888
I
8mm
n n n
1 l P
el
MERLIN Plus System Features 5-93