Specifications

Recall
DESCRIPTION
If you are on a PBX or Centrex system, you can use the Recall feature when
directions tell you to include a switchhook flash.
CONSIDERATIONS
By touching the Recall button, you will get one of the following:
l A new dial tone.
l Access to Custom-calling services.
If you have PBX, Centrex, or Custom Calling features, you must touch Recall
any time instructions call for a switchhook flash. By touching the Recall
button, you automatically place a specially timed pause onto the line. If you
press the switchhook instead, you disconnect your call.
ADMINISTRATION
None
PROGRAMMING - None
HOW TO USE
To use Recall as a switchhook flash:
1 Touch Recall.
NOTE: Remote Line Access (RLA) is an ASA feature and therefore,
requires the assignment of the ASA jack. If the ASA jack assignment
has not yet been made, refer to “Automatic System Access” in this
section before attempting to administer this feature.
DESCRIPTION
When the system is in RLA mode, you can call in from outside (for example,
from your home phone) and use a password to gain access to one of the
system’s outside lines. You can also use RLA to change the telephone
number to which calls are being forwarded during CF operation. (For more
information, see “Call Forwarding” earlier in this section.) In RLA mode, the
Voice Synthesis Processor (VSP) prompts callers through the procedures for
entering a password and gaining access to an outside line.
MERLIN Plus System Features 5-91