Specifications

4 Touch Administer.
The console beeps twice.
5 Leave administration
position.
PROGRAMMING
HOW TO USE
r
1
node by sliding the T/P s Gtch to the center
If you want to lock the programming function on all the voice terminals in
‘your system (except the administrator/attendant console connected to jack 10):
1 Enter administration mode by sliding the TIP switch to P and touching
Administer.
2 Dial *89.
3 Perform one of the following procedures according to whether you want
to lock or unlock the programming function at all the voice terminals in
your system:
D
Touch Conference to lock every voice terminal in your system.
A green light goes on next to the Auto intercom button corresponding to the
appropriate voice terminals.
The voice terminals are locked; they cannot enter
programming mode.
b
Touch Drop to unlock all voice terminals in your system.
A green light goes off next to the Auto intercom button corresponding to the
appropriate voice terminals.
The voice terminals are unlocked; they can enter
programming mode when necessary.
4 Touch Administer.
The console beeps twice.
5 Leave administration mode by sliding the TIP switch to the center
position.
None
Check with your system administrator to see if you can program features at
your voice terminal or if programming can be done only at the
administrator/attendant console.
5-90 MERLIN Plus Svstem Features