Specifications

CONSIDERATIONS
To program features onto a voice terminal, the administrator can use the
Centralized Programming or the Copy feature.
The TIP switch allows a person to test the voice terminal lights and ringing of
the voice terminal and program features on the voice terminal. When the
system administrator has locked the programming function at a particular
voice terminal, the person at the voice terminal can still slide the TIP switch
to both the Test and the Program positions and can use the Test option only.
However, the person cannot change any programmed features at the voice
terminal.
When your MERLIN Plus system comes from the factory, programming can
be done by the user at his or her own voice terminal (each voice terminal’s
T/P switch is unlocked).
The administrator/attendant console connected to jack 10 cannot be locked out
of program mode.
ADMINISTRATION
If your responsibilities do not include system administration, skip this
information.
To lock or unlock the programming function on an individual voice terminal:
1 Enter administration mode by sliding the TIP switch to P and touching
Administer.
2 Dial *89.
3 Perform one of the following procedures:
) Touch the Auto Intercom button of the voice terminal that you are
administering.
Green light on = the voice terminal is locked.
Green light off = programming can be done from the voice terminal.
b If you don’t have an Auto Intercom button for the voice terminal, then
. use the corresponding dial code from the chart below:
If the intercom
number is:
Intercom 10
Intercom 11
Intercom 12
Intercom 13
Intercom 14
Intercom 15
Intercom 16
Intercom 17
Intercom 18
Intercom 19
Dial this code:
#22
#21
#20
#19
#18
#17
#16
#15
#14
#13
If the intercom
number is:
Intercom 20
Intercom 21
Intercom 22
Intercom 23
Intercom 24
Intercom 25
Intercom 26
Intercom 27
Intercom 28
Intercom 29
Dial this code:
#03
#04
#05
#06
#07
#OS
#09
#lO
#ll
#12
MERLIN Plus System Features 5-89