Specifications

System Configuration Form
Use the System Configuration Form to record information about the
following:
l Dial Signals
l Long Distance Dialing
l Transfer Return Interval
l Call Report
l Music-on-Hold
l Background Music
l Outside Telephone Lines
l Voice Terminals
The following information should help you make the appropriate entries for
your system on the System Configuration Form.
DIAL SIGNALS
The MERLIN Plus system comes set to generate Touch-Tones when you dial
an outside call. This means that if one or more of your outside telephone
lines transmits rotary (pulse) signals, you have to administer the-system for
rotary dialing. Otherwise you won’t be able to dial out over the rotary lines.
NOTE:
If some of your outside lines are Touch-Tone and some rotary, you
may want to ask your local telephone company to replace the rotary
lines with Touch-Tone lines.
Under “Dial Signals’ on the form . . .
Check the box next to “Touch-Tone” if all the outside telephone lines
connected to your system are Touch-Tone lines.
Check the box next to “Rotary (Pulse)” if one or more of the outside lines
connected to your system are rotary lines.
LONG DISTANCE DIALING
Under “Long Distance Dialing” . . .
Check the box next to “Toll-Prefix” if you have to dial a toll prefix (1 or 0)
before the area code when you dial the telephone number for a long
distance call.
Check the box next to “Area Code Only” if you do not have to dial a toll
prefix (1 or 0) before the area code when you dial the telephone number
for a long distance call.