Specifications

ADMINISTRATION
None
PROGRAMMING
The Privacy feature requires a button with lights.
To program a Privacy button for your voice terminal:
1 Label the button Privacy.
2 Slide the TIP switch to P.
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
3 Touch the button you want to program.
4 Dial *72.
5 Slide the TIP switch to the center position.
HOW TO USE
To suspend the Privacy feature:
1 Touch Privacy.
The green light next to the button goes ofi
To activate the Privacy feature:
1 If the green light next to Privacy is off, touch the button.
The green light next to the button goes on.
DESCRIPTION
The system administrator can administer the Privacy feature for Line A and/or
Line E so that no one in the system can bridge onto or monitor these lines
while a device plugged into the Aux jack is off-hook on Line A or Line E.
(See “Auxiliary Lines. “)
CONSIDERATIONS
This feature is used for a modem, facsimile machine, or other equipment
connected to the line through an auxiliary (AUX) jack on the control unit.
This Privacy must be administered and therefore is a different feature than
the Privacy feature that people can program for their voice terminals.
-