Specifications

4 Slide the TIP switch to the center position.
HOW TO USE
From a 61922 Voice Terminal If you are using a BE-22 voice terminal, use
the following procedure to program a Personal Speed Dial sequence:
1 Slide the TIP switch to P.
The voice terminal rings every 5 seconds to remind you that you are progrumrtzing and that
you cannot place or receive culls.
2 Dial a Personal Speed Dial code ( #f 01 through # 12).
3 Dial *90 plus a telephone number or a PBX, Centrex, or Custom Calling
feature code. Follow the instructions above if you need to include a special
character in the dialing sequence.
4 Slide the TIP switch to the center position.
from a MS-70 Voice Terminal To place a call using a Personal Speed Dial
code:
1 Touch Speakerphone or lift the handset.
2 Dial a Personal Speed Dial code (#Ol through #24).
3 If you programmed the special character STOP in a personal speed dial
sequence, after you hear the second dial tone, dial the Personal Speed
Dial code again to continue the dialing.
4 If the line is busy, touch Speakerphone or hang up to cancel the call.
From a MS-22 Voice Terminal To place a call using a Personal Speed Dial
code:
1 Touch Speakerphone or lift the handset.
3 Dial a Personal Speed Dial code ( # 01 through # 12).
3 If you programmed the special character STOP in a personal speed dial
sequence, after you hear the second dial tone dial the Personal Speed Dial
code again to continue the dialing.
4 If the line is busy, touch Speakerphone or hang up to cancel the call.
5-84 MERLIN Plus System Features