Specifications

.
2 Slide the TIP switch to P.
7’he voice terminal rings every 5 seccnds to remind you that you are programming and that
you cannot place or receive calls.
3 Touch the button you want to program.
4 Dial *SO plus a telephone number or a PBX or Centrex code (if you need
to include a special character in the dialing sequence, use the directions
above).
5 Slide the TIP switch to the center position.
HOW TO USE
1 .P
q
To dial an outside number with one touch:
T .P
&I
1 Without touching Speakerphone or lifting your handset, touch the
Outside Auto Dial button for the number you want to dial.
Your voice terminal speaker goes on, and you hear dialing.
2 If you programmed the special character STOP in a dialing sequence, after
you hear the second dial tone, touch the Outside Auto Dial button again
to continue the dialing.
3 When you hear the other person answer, start speaking or lift your
handset then start speaking.
II
cl
Homo
Cl
Offi
pJ -I
If the line is busy or if no one answers:
1 Touch Speakerphone or hang up to cancel the call.
i
DESCRIPTION
When the system administrator assigns lines to voice terminals, he or she can
select lines that will serve as personal lines for individuals in the business,
such .as the president of the company. No one else has these lines on his or
her voice terminal. Calls that come in on these personal lines will not ring at
other voice terminals or at the attendant’s console.
MERLIN Plus Svstern Features 5-81