Specifications

To use this feature by dialing a code:
1 Touch Intercom.
2 Lift your handset.
3 Dial 6.
4 When you hear a beep, make your announcement.
When you hang up, the loudspeaker turns off automatically.
DESCRIPJION
You can use a Manual Signaling button to generate a beep at a co-worker’s
voice terminal. Most often, this feature is used by a boss who wants to buzz
his or her secretary. Assign a Manual Signaling button to each person you
want to signal.
CONSIDERATIONS
You can signal someone with a Manual Signaling button while you have an
outside call in progress.
The beep sounds at your co-worker’s voice terminal even if it is busy.
If you program this feature on a button with lights, the green light next to the
button goes on when your co-worker uses his or her voice terminal or uses
the Do Not Disturb feature.
You cannot have both a Manual Signaling button and an Auto Intercom button
for the same person.
If you try to program both, you deactivate the feature
that you programmed earlier.
You can use either feature to place an intercom
call. (See “Auto Intercom. “)
ADMINISTRATION
None
PROGRAMMING
To program a Manual Signaling button for your voice terminal:
1 Label the button Signal plus a name.
2 Slide the TIP switch to P.
The voice terminal rings eve y 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
3 Touch the button you want to program.
- -_ ..--. ._. -. ^ -