Specifications

CONSIDERATIONS
Refer to “Loudspeaker Paging System” under “Accessories” at the end of this
section.
ADMINISTRATION
PROGRAMMING
HOW TO USE
Refer to “Loudspeaker Paging System” under “Accessories” at the end of this
section.
If your loudspeaker paging system is connected to the page jack on the
control unit, you can program a loudspeaker paging button to use instead of a
dial code whenever you want to page someone.
A button with lights is recommended for the Loudspeaker Page feature:
1 Label the button Loudspeaker Page.
2 Slide the TIP switch to P.
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
3 Touch Loudspeaker Page.
4 Dial *91.
5 Dial 6.
6 Slide the TIP switch to the center position.
If your loudspeaker paging system is connected to a CO line, follow this
procedure:
1 Touch the loudspeaker page’s line button.
2 Follow the instructions provided with your loudspeaker page system.
If your loudspeaker paging system is connected to the page jack on the
control unit, you can use a programmed button or a dial code to access the
Loudspeaker Page feature.
To use a Loudspeaker Page button:
I Touch Loudspeaker Page.
2 When you hear the beep, lift your handset and make your announcement.
MERLIN Plus System Features 5-73