Specifications

HOW TO USE
You can use a programmed button or a dial code to access this feature.
If you are using the Last Number Dial feature, you can follow this procedure
to have the system redial the last number you dialed:
1 Without touching Speakerphone or lifting your handset,
touch Last Number,
or dial #24 if you haven’t reprogrammed this as a personal speed dial
code.
Your voice terminal speaker goes on, and you hear dialing.
2 When you hear the other person answer, begin talking or lift your handset
and begin talking.
If the line is busy, or if no one answers:
1 Touch Speakerphone or hang up the handset to cancel the call.
If later you want the system to redial the number, touch Last Number, or dial
#24 again.
DESCRIPTION
The lights next to the line buttons on your MERLIN Plus system voice
terminal give you immediate status of any of your lines. There is also a light
next to the Message button, and, on most voice terminals, there is a light next
to the Speakerphone button.
The lights next to the feature buttons on your voice terminal indicate the
on/off status of the feature programmed on that button.