Specifications

3 Touch each line button to change its disconnect interval. Each touch of the
button gives you one of the following codes:
Steady green light on = line has long disconnect interval
Green light off = line has short disconnect interval
4 Touch Administer.
5 Leave administration mode by sliding the TIP switch to the center
position.
I
cl
cl
555-1234 q
PROGRAMMING
None
HOW TO USE
None
DESCRIPTION
CONSIDERATIONS
By programming the Exclusive Hold feature onto a button, you can put an
outside caller on Exclusive Hold, which means that no one else at another
voice terminal in the system can pick up the held call.
This feature must be programmed on a button with a green light.
To place a call on normal hold, after it’s been placed on Exclusive Hold, or
vice versa, you must reconnect with the caller before touching the hold
button.
When you leave a call on Exclusive Hold for more than one minute, your
voice terminal rings at one minute intervals to remind you that the call is on
hold.
ADMINISTRATION
PROGRAMMING
None
You need a button with a green light to program an Exclusive Hold button:
1 Label the button “Exclusive Hold.”
2 Slide the TIP switch to P.
The voice terminal rings every five seconds to remind you that you are programming and
you cannot place or receive calls.
3 Touch Exclusive Hold.
4 Dial *77.
MERLIN Plus Svstem Features
5-63