Specifications

HOW TO USE
5 Leave administration mode by sliding the TIP switch to the center
position.
To program a Group Page button for your voice terminal:
;
1 Label the button Group Page plus a group number.
2 Slide the TIP switch to P.
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
3 Touch the button you want to program.
4 Dial *91 plus a Group Page code:
70 = Page-All (all voice terminals in the system)
71 = group 1
72 = group 2
5 Slide the TIP switch to the center position.
1 l P
q
1 .P
54
You can use a programmed button or a dial code to access this feature.
To use a Group Page button to make an announcement through a group of
voice terminal speakers:
1 Touch the Group Page button for the group you want to page.
2 When you hear a beep, lift your handset and make the announcement.
NOTE: If you don’t lift your handset to make the announcement and
another BIS terminal is nearby, you may hear a loud squeal from
your voice terminal.
To page a group using a dial code:
1 Touch Intercom.
2 Touch Speakerphone or lift your handset.
..rn, 1k1 n,..- m..-r-- r--l...--
c c1