Specifications

3 Perform the appropriate procedure:
b Touch the appropriate Auto Intercom button(s) until the green light
beside it shows the paging group assignment you prefer.
Green light on = voice terminal is assigned to the group
Green light off = voice terminal is not assigned to the group
w If you do not have an Auto Intercom button for the voice terminal you
want to add or remove from the paging group, dial a code from the
chart below that corresponds with the voice terminal.
If the intercom
number is:
Intercom 10
Intercom 11
Intercom 12
Intercom 13
Intercom 14
Intercom 15
Intercom 16
Intercom 17
Intercom 18
Intercom 19
Dial this code:
#22
#21
#20
#19
#18
#17
#16
#15
#14
#13
If the intercom
number is:
Intercom 20
Intercom 21
Intercom 22
Intercom 23
Intercom 24
Intercom 25
Intercom 26
Intercom 27
Intercom 28
Intercom 29
Dial this code:
#03
#04
#05
#06
#07
#08
#09
#lO
#ll
#12
4 Touch Administer.
The console beeps tzoice.
5 Follow steps 2 through 4 for each paging group you want to administer.
6 Leave administration mode by sliding the TIP switch to the center
position.
If you want to clear all entries from group 1 or from group 2:
1 Enter administration mode by sliding the TIP switch to P and touching
Administer.
2 Dial *71 for group 1 or *72 for group 2.
3 Touch Drop.
4 Touch Administer.
The console beeps twice.