Specifications

l Operating the Timer
Timer display screen
12:03a
+ Clock &
0o:oo
+ Timer)
To operate the timer for calls you need to time:
Press Time/Timer (to
display timer).
a
Press Timer Start to turn the timer to 0O:OO and start it.
b
When you are finished using the timer, press Timer Stop.
When you want to return to the Clock/Calendar display, which shows the
time, day, and date:
l Press Time/Timer.
When you want to return to the call handling display:
l Press Time/Timer.
DESCRIPTION
When you are busy and do not want to receive calls, you can touch the Do
Not Disturb button, if you have programmed one onto your voice terminal.
When you receive outside calls, the green light next to the line button flashes,
but your voice terminal does not ring.
Calls transferred to you return to the sender, and intercom calls get a busy
signal.
When you activate the Do Not Disturb at your voice terminal, the green light
goes on next to your Auto Intercom button at other people’s voice terminals.
Calls you transfer will return to you if they are unanswered.
CONSIDERATIONS
ADMINISTRATION
None
PROGRAMMING
The Do Not Disturb feature requires a button with lights.
To program a Do Not Disturb button for your voice terminal:
1 Label the button Do Not Disturb.
2 Slide the TIP switch to P.
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
3 Touch the button you want to program.
,. CI
.,F”, ,111 l-v..- CT..-I^-- I-^^* .._^^