Specifications

5 Repeat for other lines.
6 Touch Administer.
The console beeps twice.
7 Leave administration mode by sliding the TIP switch to the center
position.
PROGRAMMING
HOW TO USE
A button with a red and green light next to it is required for the DXD
features.
To program a CFlDXD button on a voice terminal:
1 Label the button CFIDXD.
2 Slide the TIP switch to P.
The voice terminal rings every 5 seconds to remind you that you’re programming and that
you can’t place OY receive calls.
3 Touch the button you want to program.
4 Dial *83.
5 Slide the T/P switch to the center position.
Using the CF/DXD Button
Touching the CFlDXD button repeatedly cycles the system through DXD, CF,
and normal modes. The red and green lights next to the CFlDXD button will
help you recognize which mode the system is in.
Green and red light off = Normal mode
Only green light on = DXD mode
Only red light on = CF mode
DESCRIPTION
Most businesses find it inappropriate for their employees to make billable calls
to numbers such as those beginning with the “976” exchange or the ’ 900”
area code, for services such as, comedy, weather, sports, lottery, and
chatlines. The Disallowed List feature enables you to deny access to up to 20
area codes, exchanges, and entire numbers, even on unrestricted lines.
If a voice terminal has been assigned a disallowed number, any attempt to
dial that number will not go through. As soon as the dialed digits match any
complete disallowed number, dialing is blocked. The only exception to this is
e .m LICC), Ihl lm**- C. ,,.+rrm
Cnn,, ,..A_