Specifications

ADMINISTRATION
The system administrator can use the Program Mode Lock feature to prevent
people within the system from changing programming assignments on their
voice terminals. (See “Program Mode Lock.“)
If your responsibilities do not include system administration, skip this
information.
To program a feature onto a voice terminal from the administrator/attendant
console:
1 Enter administration mode by sliding. the TIP switch to P and touching
Administer.
2 Touch the Auto Intercom button or dial the intercom number for the voice
terminal you want to program.
2 Touch Conference.
Green lights go on next to the line buttons of lines already assigned to the voice terminal.
4 Follow the same steps to program the feature that you would follow if you
were at the voice terminal.
6 When you are finished programming the features for that voice terminal,
touch Conference again.
6 Leave administration mode by sliding the TIP switch to the center
position.
I 1
1 .P
M
PROGRAMMING
None
T .P
4
HOW TO USE
None
DESCRIPTION
When you want people outside the MERLIN Plus system to join a call in
progress, you can use the Conference feature. You can set up a conference
call that includes up to two people from outside the MERLIN Plus system, up
to two people within the system, and yourself, a total of five people.
CONSIDERATIONS
People connected to the MERLIN Plus system can bridge onto an outside line
that is active on the conference call unless one of the participants has
activated the Privacy feature. However, when the maximum configuration of
three people within the system and two from outside is reached, attempts to
add more people will be denied.
Use the Drop button followed by touching the appropriate line button when
MERLIN Plus Svstem Features 5-39