Specifications

6 Leave administration mode by sliding the TIP switch to the center
position.
Use the reset restriction code to ensure the integrity of assigned call
restrictions:
1 Enter administration mode by sliding the TIP switch to P and touching
Administer.
2 Dial *11 plus the line button you want to reset.
Green light on = line is restriction reset.
Green light ofi = line is not restriction reset. (System default.)
3 Touch Administer.
The console beeps twice.
4 Leave administration mode by sliding the TIP switch to the center
position.
PROGRAMMING
None
HOW TO USE
Ask your system administrator what call restrictions, if any, he or she has
assigned to your voice terminal.
DESCRIPTION
The Centralized Programming feature allows the system administrator the
convenience of programming features onto individual voice terminals directly
from the administrator/attendant console. In this way there is no need to go
to each voice terminal to do the progra
mming.
This feature is useful when
the administrator is assigning Ringing Options for incoming calls.
CONSIDERATIONS
The system administrator must be certain that the appropriate feature buttons
on the voice terminals are accurately labeled.
The voice terminal being programmed must be idle.
If the voice terminal is
busy or in program mode, the administrator hears a beep at the
administrator/attendant console, indicating that he or she cannot use this
feature until the voice terminal is idle again.
This feature cannot be used to program station 10.
5-36 MERLIN Plus System Features