Specifications

CONSIDERATIONS
ADMINISTRATION
PROGRAMMING
l
Option C-You
can program a One-Touch Call Pickup button for a specific
voice terminal in your business so that when the person is away, you can
answer that person’s calls with one touch.
You,
can program a Call Pickup
button for each voice terminal for which you need to answer calls.
If the line on which the call is coming in appears on a button on your voice
terminal, you do not need to use the Call Pickup feature to answer the call.
You can just touch the line button on which the call is ringing and then touch
Speakerphone
or lift your handset.
If you want someone in the office, such as a guard, to answer calls that come
in after hours, program a Call Pickup button for calls that come in at the
administrator/attendant console. Since the attendant console has all the lines
of your MERLIN Plus system, the person answering calls after hours can pick
up all calls by touching the Call Pickup button whenever the attendant
console rings. If the person is in another part of the building, the attendant
can connect his or her console and an extra alert device to a Supplemental
Alert Adapter (see ‘Supplemental Alert Adapter’ under ‘Accessory
Equipment”), so that each time a call comes in, an extra alert device goes on.
None
You do not need to program Option A.
To program Option B:
1
Label the button
Call Pickup.
2
Slide the
TIP
switch to P.
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place
or
receive calls.
3
Touch the button you want to program.
4 Dial
*85.
5
Slide the
TIP
switch to the center position.
mmpgg
To program Option C:
1
Label the button
Call Pickup
plus an intercom number.
2
Slide the
TIP
switch to P.
The voice terminal rings evey 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
3
Touch the button you want to program.
4
Dial
*85
plus an intercom number.
5
Slide the
TIP
switch to the center position.