Specifications

ADMINISTRATION
A synthesized voice message:
This message is automatically supplied by the VSP in the control unit. The
administrator can modify the message when necessary or may choose to
turn off the message.
That one jack on the control unit be dedicated to the ASA features.
See “Automatic System Access” in this section for administration
procedures.
That you administer at least one line to an incoming and one line to an
outgoing line group:
At startup, none of the system’s lines are assigned to the CF incoming or
outgoing line group.
If there is only one line in the incoming line group and one line in the
outgoing line group, they cannot be the same line. The green light next to
the CF button will flash when you try to turn it on.
When the system is in CF mode, the feature’s operation affects only those
calls that come in on lines in the CF incoming line group. Likewise, the
system only uses the lines in the CF outgoing line group to forward calls.
Calls coming in on lines not assigned to the CF incoming line group are
not automatically answered for call forwarding.
If your responsibilities do not include system administration, skip this
information.
Call Forwarding Line Groups
At startup, none of the system’s outside lines are assigned to the CF incoming
or outgoing line group. To use this feature you must assign line(s) to each
group*
1 Enter administration mode by sliding the TIP switch to P and touching
Administer.
2 Dial the code for the type of line group list you want to administer:
b CF incoming line group, dial *51
Green light on = line is assigned to the group
Green light off = line is not assigned to the group
t For a CF outgoing line group, dial *52
Green light on = line is assigned to the group
Green light of = line is not assigned to the group
3 Touch the line buttons until the green lights show the makeup you want
for the line group.
MERLIN Plus System Features 5-25