Specifications

PROGRAMMING
HOW TO USE
5 Touch Administer.
The console beeps twice.
6 Leave administration mode by sliding the TIP switch to the center
position.
T l P
q
To remove Button-Free Line Operation by reassigning lines to separate
buttons on a voice terminal:
1 Enter administration mode by sliding the TIP switch to P and touching
Administer.
2 Touch the Auto Intercom button for the voice terminal you are
administering.
3 Dial *34.
A green light should go on next to the lines that have been assigned to the voice terminal.
4 Touch Administer.
The console beeps twice.
5 Leave administration mode by sliding the TIP switch to the center
position.
None
If you do not have a line button for a call that you have received or that has
been transferred to you, you can still put the call on hold using the Hold
button. To retrieve the call, you can use the Hold Retrieve feature. (See
” Hold Retrieve. ” )