Specifications

HOW TO USE
To place an intercom call with one touch:
PROGRAMMING
A button with lights is recommended but not required for the Auto Intercom
feature.
To program an Auto Intercom button for your voice terminal:
Label the button with a name and intercom number.
Slide the TIP switch to P.
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place OY receive calls.
Touch the button you want to program.
Dial *91 plus an intercom number.
Slide the TIP switch to the center position.
1 Touch the Auto Intercom button for the intercom number you want to
dial.
2 If you hear a short beep, begin speaking or lift your handset. If you hear
a long beep, wait for someone to answer on the other end.
If the line is busy or if no one answers:
1 Touch Speakerphone to cancel the call.
Automatic Line Selection
DESCRIPTION
You can program the order in which your system selects outside lines when
you touch Speakerphone or lift your handset to place a call. For example,
you can program the line you use most often to be the first line in the
Automatic Line Selection sequence. A line you use less often can be
programmed to be the next line the system selects.
Then, when you touch