Specifications

This feature remains active until you:
1 Touch Auto Answer-All again.
The green light next to the button goes off.
NOTE:
This feature is used with a Hands-Free Unit.
DESCRIPTION
If your voice terminal has the Hands-Free-Answer-on-Intercom (HFAI) feature
or is connected to a Hands-Free Unit (HFU), you can have your speakerphone
go on automatically whenever you receive an intercom call. To do this with
an HFU, you must program an Auto Answer-Intercom button.
CONSIDERATIONS
You can have both Auto Answer-Intercom and Auto Answer-All programmed
for your voice terminal, but both features cannot be activated at the same time.
ADMINISTRATION
Nohe
PROGRAMMING
Program the Auto Answer-Intercom feature on a button with lights.
To program an Auto Answer-Intercom button for your voice terminal:
1 Label the button Auto Answer-Intercom.
2 Slide the TIP switch to P.
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
3 Touch the button you want to program.
4 Dial *70.
5 Slide the TIP switch to the center position.
n n n
n n n
q
q mm
mum
l 70
TOP
H