Specifications

ADMINISTRATION
If your responsibilities do not include system administration, skip this section.
To assign an alternate attendant position:
1 Enter administration mode by sliding the TIP switch to P and touching
Administer.
2 Dial *79.
3 Touch the Auto Intercom button or dial the intercom number of the voice
terminal you want to assign as the alternate attendant console.
4 Touch Administer.
The console beeps twice.
5 Leave administration mode by sliding the TIP to the center position.
PROGRAMMING
If you will be using the System Answer feature, see “System Answer” later in
this section, you must program the SA button. Only the attendant or the
alternate attendant can have the SA button.
1 Label the button “System Answer. ’
2 Slide the TIP switch to P
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
HOW TO USE
3 Touch the button you want to program.
4 Dial *58.
5 Slide the TIP switch to the center position 1.
To activate System Answer from the Alternate Attendant position:
1 Touch System Answer.
Green light on = SA on
Green light off = SA off
Green light flashing = Problem with SA
If the green light next to the System Answer button is flashing, notify the
system administrator who should refer to Section 7, “Troubleshooting, ’ to
correct the problem.