Specifications

5 Touch Administer.
The console beeps twice.
6 Leave administration mode by sliding the TIP switch to the center
position.
To clear all the entries from an Allowed List:
1 Enter administration mode by sliding the TIP switch to P and touching
Administer.
2 Dial a * and a 2-digit code (01 through 08) that corresponds to the number
of the list you want to clear.
For example, to clear all entries from List 6, dial *06.
3 Touch Drop.
The console beeps twice.
4 Touch Administer.
The console beeps twice.
5 Leave administration mode by sliding the T/l’ switch to the center
position.
Before you assign Allowed Lists to voice terminals in your system, refer to the
Call Restrictions, Allowed and Disallowed Lists Forms that you have filled
out. Then use the following procedures to assign or remove voice terminals
for access to Allowed Lists:
1 Enter administration mode by sliding the TIP switch to P and touching
Administer.
3 Dial a * and a 2-digit code (01 through 08) that corresponds to the list you
want to assign to the voice terminal.
3 Dial 00.
The green light goes on next to the Auto Intercom button for each voice terminal to which
this list is already assigned.
For example, to assign List 2 to a voice terminal, dial *0200.