Specifications

When the administrator has dialed the maximum eight digits for an Allowed
List entry, the system beeps twice to remind the administrator that he or she
cannot dial any more digits.
If the administrator dials fewer than eight digits,
the system does not beep.
If your responsibilities do not include system administration, skip this
information.
Before you administer Allowed Lists for your system, refer to the Allowed
List Form that you have filled out.
To set up an Allowed List:
ADMINISTRATION
Enter administration mode by sliding the TIP switch to P and touching
Administer.
Dial a * and a 2-digit code (01 through 08) that corresponds to the number
of the list.
For example, to add an entry to List 5, dial *05.
Dial the 2-digit number of the item in the Allowed List (between 01 and
10).
For example, to add an entry to List 3 as the first item on the list, dial *03
01.
Dial the number, toll-prefix and area code if necessary, or exchange to be
added to the list (maximum eight digits).
For example, to add the 201 area code with the toll-prefix, and 834
exchange to List 2 as the seventh item on the list, dial *02 07 1 201 834.
Touch Administer.
The console beeps twice.
Leave administration mode by sliding the TIP switch to the center
position.
To delete an entry from an Allowed List:
1 Enter administration mode by sliding the TIP switch to P and touching
Administer.
2 Dial a * and a 2-digit code (01 through 08) that corresponds to the number
of the list.
3 Dial the Zdigit item number (01 through 10) of the entry you want to
delete.
For example, to delete the eighth entry of List 1, dial *Ol 08.
4 Touch Drop.