Instruction manual

The 4400-Series Telephone Family
3-18
Installation, SPM, Maintenance, and Troubleshooting Supplement
Wall-Mounting the 4400-Series
Telephone
3
You can mount all the 4400-Series telephones (except the 4424LD+
telephones) on a wall by using the optional color-contrasted stand. The DSS
4450 cannot be wall mounted.
The wall-mounting stand is available in gray only. The ordering codes are as
follows:
■ Small Wall-Mounting Stand for use with the 4400, 4400D, and 4406D+
telephones:
— PEC 4499-SML, comcode 108541210
■ Large Wall-Mounting Stand for use with the 4412D+ and 4424D+
telephones:
— PEC 4499-LRG, comcode 108541293
To wall mount a 4400-Series telephone, follow these steps to attach a stand to
a 4400-Series telephone:
The optional wall-mounting stand can also be used with all 4400-
Series telephones and the DSS 4450 to increase the viewing
angle when used on a desk.
■ Before you assemble the stand, you must have all cords attached
and running through their proper channels. See the instructions
packaged with the 4400-Series telephone for jacks and placement
of cords.
■ To use the stand to increase the angle of a 4400-Series telephone
on a desk, follow the steps below but turn the stand around so that
the thinner end of the stand is at the bottom of the back side of the
4400-Series telephone and the thicker end is at the top of the 4400-
Series telephone.