Instruction manual

Basic System Management Procedures

8-58

Installation, SPM, Maintenance, and Troubleshooting Supplement

Password 8

The Password option is used by qualified service personnel to change the

modem connection password. A password is always required to establish a

connection with the built-in modem. The password always consists of seven

characters. You can perform remote system programming only if you enter the

password correctly. A default password is set at the factory. You must obtain

this password from your system consultant (SC).

To change the modem connection password, follow the steps below:

1. At the Standard SPM Mode Main menu, click

 to select Password.

2. Type the old (current) password. Do not press

If you type the old password incorrectly, the bottom of the screen displays

the message, Not Equal. Repeat Step 2.

SPM Main Menu

Menu: Select Function

Sys Program Maintenance

Backup Restore

Boards Pass-Thru

Print Opts Password

Monitor Language

Password:

Enter Old Password