Instruction manual

Using Quick Access
8-35
System Programming Maintenance
■ Allowed Lists. Use to assign one or more Assigned Lists to the extension.
Use the Allowed List tab to view the current extensions in that list. Use the
‘Is User’ check box to add/remove the selected extension from the lists.
Allowed List defines area codes and exchange prefixes that this extension
user is allowed to dial when making an outside call.
■ Disallowed Lists. Use to assign one or more Unassigned Lists to the
extension. Use the allowed list tab to view the current extensions in that list.
Use the ‘Is User’ check box to add/remove the selected extension from the
lists. Disallowed List defines area codes and exchange prefixes that this
extension user is not allowed to dial when making an outside call.
■ Show Number List. If checked, the Allowed or Disallowed List is read from
the MERLIN MAGIX system and displayed for the currently selected
Allowed/Disallowed List.
■ The Standard SPM Mode Interface must be used to define Night
Service Coverage.
■ Automatic Route Selection (ARS) allows outgoing calls to be
dynamically routed over selected facilities after dialing an ARS
access code (usually 9). This enables the MERLIN MAGIX
Integrated System to select the least expensive route for each call
based on the area code and prefix that the extension user dials.