Instruction manual

Getting Started
8-9
System Programming Maintenance
11. Highlight the name of the new modem and click Properties.
12. On the General tab, change the value in the drop-down list under Maximum
Speed to 2400.
13. Verify the following settings:
Connection Preferences
Data Bits: 8
Parity: None
Stop Bits: 1
[X] Wait for dialtone before dialing.
Advanced
[X] Use Flow Control
[X] Hardware (RTS/CTS)
14. To save the new settings, click OK.
15. To close the Modem Properties dialog box, click Close.
16. From the Control Panel, click File, then choose Exit to leave the Control
Panel and return to the Windows desktop.
Setting the Start Bar “Auto Hide”
Property/Changing the Screen
Resolution
8
Some WinSPM screens may be difficult to use in 640x480 resolution because
they use the full height of the screen. For this reason, you must either turn
“Auto hide” on for the Taskbar or increase your screen resolution settings. If you
cannot see the OK button at the bottom of the screen, perform one of the
following procedures.
Be sure to always select the new modem from the list presented
during connection to WinSPM.