Instruction manual

PCMCIA Upgrade Card
7-14
Installation, SPM, Maintenance, and Troubleshooting Supplement
Upgrading Module Firmware 7
Follow these steps to upgrade module firmware without changing system
programming:
1. Insert the Upgrade card into the PCMCIA slot on the processor module.
2. Follow this system programming path: Menu
→Maintenance→Slot.
3. Enter the slot number of the module that needs a firmware upgrade. (You
can upgrade only one module at a time.)
4. Select Busyout.
5. Answer “Ye s ” to Do you want to continue?
6. When you see Busy-Out Complete on the screen, select Exit.
7. Select Upgrade from the Maintenance Menu.
Validation of MemoryCard in Progress appears on the screen
followed by Validation of MemoryCard Successfully
Completed.
8. Select Exit.
9. The current module and version appears on the screen, followed by
Select one: and the available versions for upgrading this module.
10. Select the version desired (you may only have one choice).
11. Press Enter, and select Yes when Do you want to continue?
appears.
12. In Progress and the percentage completed appear as the upgrade is
loaded.