Instruction manual

Upgrading from a MERLIN LEGEND System
7-11
Upgrading to MERLIN MAGIX Release 1.5
Figure 7-4. Positioning Mounting Screws
2. Use WinSPM 4.0 in Standard SPM Mode to convert the MERLIN LEGEND
backup file to MERLIN MAGIX Release 1.5. (See “Conversion Using
WinSPM 4.0” in the MERLIN MAGIX™ Integrated System Release 1.5
Release Notes.)
3. Install MERLIN MAGIX Release 1.5 software onto the processor module.
(See “Upgrading the System Software” on page 7-13.)
4. Restore the converted file onto the system.
.097"
2.454"
MERLIN LEGEND
PLASTIC CARRIER
MERLIN MAGIX EXPANSION CARRIER CONNECTED TO MERLIN LEGEND
MOUNTING SCREW LOCATIONS
MERLIN MAGIX METAL CARRIER
MOUNTING SCREW LOCATIONS
6.130"
3.102"
11.750"
7.000"
5.704"