Instruction manual

Upgrading from a MERLIN LEGEND System
7-8
Installation, SPM, Maintenance, and Troubleshooting Supplement
Preparing the MERLIN LEGEND
System
7
Follow these steps to prepare the MERLIN LEGEND system for upgrading to
the MERLIN MAGIX Release 1.5 system:
1. Remove any of these unsupported modules:
■ 008 (ATL)
■ 400 LS
■ 400 LS/TTR
■ 408 LS (ATL)
■ 408 GS/LS (ATL)
2. If you are upgrading to a MERLIN MAGIX Release 1.0 system, move
modules to the left of the carrier as necessary to eliminate any empty slots.
If adding a 100R INA module (requires a metal carrier) only one empty
slot is allowed before the 100R INA module, otherwise no empty slots
are allowed. Add more modules to fill the empty slots or upgrade the entire
system to a metal carrier system.
3. Do a board renumber each time you remove or move a module.
4. Relabel extensions.
5. Back up the system onto a floppy disk or a PC (not onto the PCMCIA card).