Instruction manual

Upgrading from a MERLIN LEGEND System

7-3

Upgrading to MERLIN MAGIX Release 1.5

Upgrading from a MERLIN

LEGEND System

Many customers want to use the capabilities of a MERLIN MAGIX system

(especially the 100R INA module) without overhauling their entire MERLIN

LEGEND system. To accomplish this, you can encase the modules introduced

in the MERLIN MAGIX system in a plastic shell and place them into the

MERLIN LEGEND plastic carrier (see instructions “Installing and Removing the

Plastic Shell” on page 7-5). You also can add a metal expansion carrier to any

MERLIN LEGEND system that has one or two plastic carriers and place

modules into the metal carrier. (Three carriers is the maximum for the system.)

You can place the following modules into a plastic or metal carrier:

■ 100 DCD

■ 100 DS1

■ 400 E&M

■ 408 GS/LS-ID-MLX

■ 412 LS-ID-TDL module

■ 800 DID

■ 800 LS-ID

■ 800 NI-BRI

■ 008 MLX

■ 008 OPT

■ 016 ETR

■ 016 MLX

■ 016 T/R

■ The 100R INA module is supported only in the metal carrier.

■ There can be no more than one empty slot in the preceding

plastic carrier.