Instruction manual

Reassigning Business Cordless 905 Line Buttons
5-23
Reassigning Buttons on the TransTalk and Business Cordless 905 Telephones
Behind Switch Mode 5
In Behind Switch mode, the system assigns an ICOM Ring button and an ICOM
Voice button (no outside lines connected to the control unit are assigned to
buttons) based on the MLS-12D button assignment (see Figure 5-11).
Figure 5-11. BC 905 Factory-Set Button Assignments in Behind Switch
Mode
The factory-set assignments can be confusing to the user. To reduce
confusion, change the button assignments; use Figure 5-8 as a guide. (Actual
line assignments depend on customer requirements.)
Figure 5-12. Reassigned BC 905 Buttons in Behind Switch Mode
ICOM
Ring
1
Line 4
2
ICOM
Voice
3
Blank
4
Blank
5
ICOM
Ring
1
ICOM
Voice
2
Blank
3
Blank
4
Blank
5