Instruction manual

Reassigning Business Cordless 905 Line Buttons
5-22
Installation, SPM, Maintenance, and Troubleshooting Supplement
a. From the System Programming menu, select Cntr-Prg ().
b. From the Centralized Programming menu, select Program
extension ().
c. Enter the extension number and select Enter (
).
d. Select Start (
).
e. Set the appropriate ringing on the lines to meet the customer’s needs
by selecting the line and entering one of the following codes:
■ *35—Ring Off
■ *36—Delay Ring
■ *37—Ring On
■ *345—All lines Ring Off
■ *346—All lines Delay Ring
■ *347—All lines Ring On
f. Set the Automatic Line Selection option:
1. Select ICOM Ring (
8+ ).
2. Enter *14—Auto Line selection sequence Programming.
3.
8+ —Intercom Ring.
4.
8+ —Intercom Voice.
5. Enter or **14—Closes Auto Line selection Process.
g. Save your entry by selecting Enter (
).
h. Exit to System Programming menu.
This Procedure assumes Customer wants the Automatic Line
Selection feature for the Business Cordless 905 telephone to
automatically select the ICOM line. This may vary with the
individual customer.