Instruction manual

Reassigning Business Cordless 905 Line Buttons
5-17
Reassigning Buttons on the TransTalk and Business Cordless 905 Telephones
Figure 5-9. BC 905 Factory-Set Button Assignments in Key Mode
Since these button assignments are based on the MLS-12D telephone, lines 3
and 8 are missing from the BC 905 telephone. Also, the line numbers assigned
to the buttons do not correspond to the etched numbers on the telephone.
The factory-set assignments can be confusing to the user. To reduce
confusion, change the button assignments; use Figure 5-10 as a guide. (Actual
line assignments depend on customer requirements.)
Figure 5-10. Reassigned BC 905 Buttons in Key Mode
To change the factory-set button assignments, do the following:
1. Remove the factory-set line assignments:
a. From the System Programming menu, select Extensions.
b. From the Extensions menu, select Lines/Trunks.
ICOM
Ring
1
Line 4
2
ICOM
Voice
3
Line 5
4
Blank
5
ICOM
Ring
1
ICOM
Voice
2
Line 1
3
Line 2
4
Line 3
5