Instruction manual

Reassigning Business Cordless 905 Line Buttons
5-16
Installation, SPM, Maintenance, and Troubleshooting Supplement
d. Select Start ().
e. Select Button 2 on the console or PC (maps to Button 3 on the BC 905
telephone).
f. Select Delete (
).
g. Save your entry by selecting Enter (
).
2. Assign the SA Voice button as shown in Figure 5-8:
a. Select Button 6 on the console or PC (maps to Button 2 on the BC 905
telephone).
b. Enter *16 to assign SA Ring. Then select Button 6 on the console or
PC again, and enter *19 to change the attribute to SA Voice.
c. Select Button 2 on the console or PC (maps to Button 3 on the BC 905
telephone).
d. Enter *18 to assign SA Originate Only Ring. If you want to change the
attribute to an SA Originate Only Voice button, select Button 2 on the
console or PC again, and enter *19 to change the attribute to SA
Originate Only Voice.
e. Select Button 11 on the console or PC (maps to Button 5 on the BC
905 telephone).
f. Enter *777 to assign Button 5 on the BC 905 as a Drop button.
g. Save your entry by selecting Enter (
).
h. Exit to the System Programming menu.
Key Mode 5
In Key mode, the system assigns an ICOM Ring button, an ICOM Voice button
and the first eight outside lines connected to the control unit based on the MLS-
12D button assignments (see Figure 5-9).