Instruction manual

Reassigning Business Cordless 905 Line Buttons
5-14
Installation, SPM, Maintenance, and Troubleshooting Supplement
f. Select Delete ().
g. Save your entry by selecting Enter (
).
2. Assign the ICOM Voice button as shown in Figure 5-6:
a. Select Button 6 on the console or PC (maps to Button B on the MDW
9031 telephone).
b. Enter *16 to assign SA Ring. Then select Button 6 on the console or
PC again, and enter *19 to change the attribute to SA Voice.
c. Save your entry by selecting Enter (
).
d. Exit to the System Programming menu.
Reassigning Business Cordless
905 Line Buttons
5
You must reassign the factory-set line buttons when you connect a Business
Cordless telephone to an 016 ETR module. The procedure varies according to
the operating mode of the system: Hybrid/PBX, Key, or Behind Switch.
Hybrid/PBX Mode 5
In Hybrid/PBX mode, the system assigns an SA (System Access) Ring button
and an SA Voice button based on the MLS-12D button assignments (see
Figure 5-7).