Instruction manual
Reassigning MDW 9031 Line Buttons
5-13
Reassigning Buttons on the TransTalk and Business Cordless 905 Telephones
The factory-set assignments can be confusing to the user. To reduce
confusion, change the button assignments; use Figure 5-6 as a guide. (Actual
line assignments depend on customer requirements.)
Figure 5-6. Reassigned MDW 9031 Buttons in Behind Switch Mode
To change the factory-set button assignments, do the following:
1. Remove the factory-set SA Voice button:
a. From the System Programming menu, select Cntr-Prg (
).
b. From the Centralized Programming menu, select Program
extension ().
c. Enter the extension number and select Enter (
).
d. Select Start (
).
e. Select Button 2 on the console or PC (maps to Button 1 on the MDW
9031 telephone).
Blank
5
Blank
6
Blank
7
Blank
8
Blank
1
Blank
2
Blank
3
Blank
4
ICOM
Ring
A
ICOM
Voice
B
Blank
C
Blank
D