Instruction manual

Reassigning MDW 9031 Line Buttons
5-9
Reassigning Buttons on the TransTalk and Business Cordless 905 Telephones
g. Assign lines to Button 4 and Button 8 on the MDW 9031 telephone:
1. Change lines being assigned to lines 1–20 by selecting Lines 1–20
on the console or PC ().
2. Select Line 4 on the console or PC (
8+ ). Line 4 is
assigned to Button 4 on the MDW 9031 telephone.
3. Select Line 8 on the console or PC (8+ ). Line 8 is
assigned to Button 8 on the MDW 9031 telephone.
4. Verify that button assignments are correct:
a. Print an Extension Report and verify that the lines assigned to the
buttons on the MDW 9031 telephone match the following:
b. If the line programming matches the report above, go to Step 5. If the
programming does not match the report above, repeat the procedure
from Step 3a above.
A EXTENSION INFORMATION
A
Button 18 *21 Blank Status None
A
Button 17 *21 Blank Status None
A
Button 16 Line 808 -N Status None
A
Button 15 Line 804 -N Status None
A
Button 14 Line 866 -N Status None
A
Button 13 Line 865 -N Status None
A
Button 12 Line 807 -N Status None
A
Button 11 Line 803 -N Status None
A
Button 10 Line 864 -N Status None
A
Button 9 Line 863 -I Status None
A
Button 8 Line 806 -I Status None
A
Button 7 Line 802 -I Status None
A
Button 6 *16 Ext Voice -I Status None
A
Button 5 Line 862 -N Status None
A
Button 4 Line 861 -I Status None
A
Button 3 Line 805 -I Status None
A
Button 2 Line 801 -I Status None
A
Button 1 *16 Ext Ring -I