Instruction manual

Reassigning MDW 9031 Line Buttons
5-7
Reassigning Buttons on the TransTalk and Business Cordless 905 Telephones
c. Enter the extension number and select Enter ().
d. Select Start (
).
e. Select Button 2 on the console or PC (maps to Button 1 on the MDW
9031 telephone).
f. Select Delete (
).
g. Select Button 6 on the console or PC (maps to Button B on the MDW
9031 telephone).
h. Enter *16 to assign an ICOM Ring button. Then select Button 6 on the
console or PC again, and enter *19 to change the attribute to ICOM
Voice.
i. Save your entry by selecting Enter (
).
j. Exit to the System Programming menu.
3. Assign the lines to buttons in the following order:
a. Assign lines to Button 1 and Button 5 on the MDW 9031 telephone:
1. Select Line 1 on the console or PC (
8+ ). Line 1 is
assigned to Button 1 on the MDW 9031 telephone.
2. Select Line 5 on the console or PC (8+ ). Line 5 is
assigned to Button 5 on the MDW 9031 telephone.
b. Assign placeholder lines to virtual buttons:
1. Change lines being assigned to lines 61–80 by selecting Lines 61–
80 on the console or PC (
).
2. Select Line 61 on the console or PC (
8+ ).
Line 61 is assigned to the virtual button above Button 5 on the
MDW 9031 telephone.
3. Select Line 62 on the console or PC (
8+ ).
Line 62 is assigned to the second virtual button above Button 5 on
the MDW 9031 telephone.
c. Assign lines to Button 2 and Button 6 on the MDW 9031 telephone:
1. Change lines being assigned to lines 1–20 by selecting Lines 1–20
on the console or PC (
).