Instruction manual

Error Events
4-26
Installation, SPM, Maintenance, and Troubleshooting Supplement
Error Events 4
Four additional error events apply to the 100R INA and 100 DCD modules:
■ 24-hour total
■ Current
■ Interval
■ Clear
From your system programming console, use the following sequence to access
the 100R INA or 100 DCD module Error events screen (be sure to select the
corresponding 100R INA or 100 DCD module slot number).
Menu: Maintenance
→Slot→Slot#→Enter→Error Events
24-Hour Total 4
The 24-hour total error event reports cumulative error statistics spanning the
past 24 hours. From your system programming console, use the following
sequence to access the 100R INA or 100 DCD module 24-Hr Total screen (be
sure to select the corresponding 100R INA or 100 DCD module slot number).
Menu: Maintenance
→Slot→Slot#→Enter→Error Events→24 hr
total
This screen functions similarly to the current screens on the 100 DS1 module
except that this new screen reports on totals for the error events over a longer
period of time. Therefore the counts are increased from three digits to four. The
following table describes the items on this screen.