Instruction manual

New Programming Options
4-20
Installation, SPM, Maintenance, and Troubleshooting Supplement
Viewing All Data Port Channel
Selections
4
You can view a summary of all channel selections for the data port. Use the
following sequence to view all channel selections.
Console Procedure SysProg
→Start→Lines and Trunks→
More→ More→CSU/DSU→Type Slot no.→
Enter→ Data Port→Type por t
no.
→Enter→Channel→
Inspect
PC Procedure
→→→More→More→→Type Slot
no.
→1→→Type port no.→1→
→
Assigning the Receive Clock 4
The receive clock samples the data coming into the system. The factory setting
is DTE (the system). Program the receive clock for each data port by using the
following sequence:
Console Procedure SysProg
→Start→Lines and Trunks→
More→ More→CSU/DSU→Type Slot no.→
Enter→ Data Port→Type por t
no.
→Enter→Receive Clk→Select DCE or
DTE
→ Enter
PC Procedure
→→→More→More→→Type Slot
no.
→1→→Type port no.→1→
→
Select DCE or DTE→ 1