Instruction manual

Features
6.
7.
8.
9.
10.
11.
Select ListFeature [List].
Select Operator ES [OpES].
If this feature is not displayed, use FindFeature [Find] or press
More.
Select ES1, ES2, or ESOff.
Select Enter.
Repeat Steps 5 through 9 to program more buttons.
Press Home.
To Change Extension Status from your
Console
1. Press one of the following programmed buttons:
■ ES Off
■ ES1
■ ES2
or press Feature and dial
■ 760 for ES Off
■ 761 for ES1
■ 762 for ES2
2. Press a DSS or Auto Dial button for the extension you
want to change.
The light next to the ES button goes off.
Extension Status
4-25