Instruction manual

Using Features
To Program Extension Status Buttons
1. Label buttons to be programmed as
■ ES Off
■ ES1
■ ES2
2. Press Menu.
3. Select Ext Program[Prog].
If this feature is not displayed, press More.
4. Select Start.
5. Press one of the buttons to be programmed.
6. Select ListFeature[List].
7. Select Operator ES[OpES].
8. Select ES1, ES2, or ESOff.
9. Select Enter.
10. Repeat steps 5-9 for additional buttons you want to program.
11. Press Home.
4-18 Extension Status